Відео

My wipers stopped working, the mechanic told me that the control stalk needs replacement, do you think that i could easily fix this by myself?

Hey everyone! Just a heads-up about working with epoxy resin. You’ve got two types: the two-part epoxy doesn’t need any UV light to set. It’s pretty neat - you mix the resin with a hardener, and they start to solidify all on their own through a chemical reaction. Give it a few hours, and it’ll be all set, no UV light needed. Now, for the one-part resin, that’s where UV light comes into play. If you’re using this kind, you’ll need a decent UV (or sometimes LED) light to get it to cure properly. The little light you might have at home might not cut it, so check the bottle for the recommended wattage. Oh, and about hydroxyethyl methacrylate (HEMA) - great job on the pronunciation, by the way - it’s in both types of resin. It helps the final product stay dry, adhere well, and keep its strength once mixed. So, if you’re experimenting at home with two-part resin, remember to mix equal parts of both. No need for a light, but patience is key as it takes a while to cure. On the flip side, if you’re using one-part UV resin, you’ll likely need a 65W light, but the payoff is it cures super fast, like in 30 seconds! I personally find the one-part UV resin a bit easier, especially if you’re just starting out. Plus, you can have fun with any leftovers.

Miley Cyrus Hannah Montana

I bought one from Temu and it doesn't spin when i blow in it

Thank you, my unit had the exact same problem. I put a new screw in too and it works fine now. Thank you for the video.

What an awesome idea.... Brilliant thanks 👍

Thanks Andrew, ive got one of these devices, its an older one and ive struggled to work it.... You have just shown me how to use it now. Brilliant 👍

Let’s hope this works

100wt bulb driver giving out low voltage , can capacitor cause it

Hi, great video! Where is the Amazon link for the motor?

Would have been nice to hear some musical clips with singing than talking through the whole video. Couldn't even tell what they really sounded like.

I bought a tens machine from aldi for $40 I love it so i decided to get another so both the wife and myself can use them, I got the same unit as yours from ebay and its terrible it just hurts. Maybe its the cheap gel pads i dont know but i dont recommend it

Too long , too much talk.

this is going in my alarm clock i just bought

Hi there, I think you`ve made a great job..........can you help to bypass Zero SRF 2019 immobiliser ......I will be grateful Sir

The pins are screwed into the cap. So remove pins first using needle nose pliers and twisting them to remove.

Gggy

The internal LCD is just the screen correct? If so then it can be fixed. Getting my BF’s father to help fix it.

1:45 - You stated that you cannot change those particular capacitors, why? Are they part of the board, or are you just saying you don't have the parts to do so?

Please play the demo I've forgotten !

Where did you buy the phone?

Absolutely not.

Is it podsible to get 240p 15khz over this adapter?

Great attempt and great video. I am currently struggling with a Phasar 2000 that was working but now that I finished polishing the case the module now resets back to 1:00 after I am done setting the time and date. I am guessing the grease i put in the wall of the pushers is causing the issue, but I am not certain

Mine broke after less than a year, in the same spot, but the design of mine looks different inside. There's no exposed titanium in the band, but rather a plastic end that is supposed to lock to two pins embedded in the end of the headphone section. The strange thing was that the plastic where the pins were embedded was completely crumbling away, as if there was something wrong with its composition. In any case Shockz was good about warrantying this pair.

can you make an update video with liks to the object that you used

😂😂😂 better this way. take a moto and a mirror and a laser pointer. tge laser will be stationary and will hit the mirror. a motor will make the mirror to move up and down . so the mirror move will have the shape o signal. the driver will take the input and the murror will bounce the laser into mirror who will reflect it to a wall. niw yiu will need just a camera of a phone and a soft who can mive the image to the left . on the phone screen will be laser at all the points in time

Embarrassing.

I had one of these, because I always had to be bleeding-edge. One of the weirdest product designs. The RGB LEDs were pretty novel.

Hello sorry for my english im french ,what is the battery you used for this lighter i cant find a 22 5 v battery I know this vidéo is old but I ll try my luck

where can i buy the card? i bought mine from a thrift store and i have no clue where to buy obe

Yeah sold them a lot in a system in those days, nice pair. It sounds even better with a subwoofer 😊

This dryer is a Kuaierte K2008, I’m not surprised that it ended up like this because its reliability is very poor.

I still have one one of those. It was a Christmas present from my long gone aunt and I still enjoy playing it now and then. There's a little video where you can see a little example which was recorded using the memory feature on my channel, including some background noise from my neighbour's renovation work at the end 😂. I hope you enjoy your keyboard. Regards.

Why didn't you reheat the first pin you soldered (pin1 - GP0)? It was clearly out of alignement due to beeing soldered on the bench.

It's a low quality knockoff of an xlerator

I started my Walkman, that very exact model purchased maybe 5-7 years ago? The PC still recognizes it, i can still use it for storage, BUT, now it's showing Verbinden m. USB and it's not charging, does that mean the battery is fully drained and dead?

Bought it yesterday it cost me €72 Inc shipping and vat...

penetrating oil, applied often for a week or two in advance ....loosens up ex nuts.. nicely. Oil feed lines carbon and sludge up BADLY. Especially so in the Bungled 2000 and Newer engines.

The indicators on my Peugeot 307sw have a loose connection. Is cleaning them as shown in the video worth a try?

How about converting the motor to run continuously, but at a variable speed? Perhaps10 rpm?

The batteries in the middle are shorting between themselves because it's not a proper fit. You should insert a divider between their ground.

Knp error2

I did this replacement without removing the analogue stick cable from the motherboard, which saved me a lot of time. This step is simply not required. You can just *gently* set it aside while swapping the circle pad 🙂

My DS Hinges broke and I might order a new shell I pray to god it goes well and I will be following this video to do it.

Great video! It would be super neat if you could get the serial plotter to display on the OLED!

helooo.. i need an app for this product for connect to my android.. thx b4

I installed a new laser today and it's not spinning. I de soldered the bridge. Put the old laser back in and it spins fine. Tried new one again and same issue. Just jutters a few times and stops. Any ideas anyone.

Good autopsy.🧑‍🔧 It's also good to witness the workings of a things not made entirely of digital circuits.📵

NEAT.